Wind energy has a massive waste problem. New technologies may be a step closer to solving it...and...How can companies recycle wind turbine blades?

 

From the CNN article

Wind energy might be the solution - or at least part of the solution - to our energy problems. We absolutely need to stop burning things (methane, oil, coal, wood, trash, retired Beanie Babies) to make energy. That is not in dispute.

One of the things that is in dispute, however, is how to deal with the waste from retired wind turbine blades. From the same article, "[b]lade waste is projected to reach 2.2 million tons in the US by 2050. Globally, the figure could be around 43 million tons by 2050." The blades are, as a CNN article writes, "made from fiberglass bound together with epoxy resin, a material so strong it is incredibly difficult and expensive to break down." 

Recycling the themoset resin is challenging, though a company named Vesta "has been working on in partnership with Aarhus University, the Danish Technological Institute and US-based epoxy company Olin, uses a liquid chemical solution to break down the blade into epoxy fragments and fibers. The epoxy resin is then sent to Olin which can process it into 'virgin-grade' epoxy"

There are other possible solutions mentioned in the article - pyrolitic separation of the resin and fibers allowing both to be reused, chopping the composite blades into fragments to then mix into cement, and...well...not much else.

A C&EN article explores the same issue and adds in an option of repurposing the blades rather than recycling them, showing an image of a playground made of decommissioned blades in the Netherlands and saying that they have also been turned into bus shelters and other public structures. The article also reports that there are companies exploring making the blades out of more easily recycled materials, though little detail of what those materials could be are provided as the materials and processes are still being devloped.